Monday, 30 January 2012

Shellback Construction Begins



Here are the Shellback station molds set up on the strongback. The bottom of the boat is made of 12mm marine plywood. The lapstrake planks will be 6mm. The stem and the midship frame are laminated clear grain spruce. The transom is 18mm marine plywood.





The garboard plank and first plank are installed. Planks are glued onto each other with epoxy thickened with cotton fibres.

This is the first of two Shellbacks that we are building. Both will be rigged for sail and rowing.

No comments:

Post a Comment