In the next picture, a layer of 10oz fibreglass cloth has been laid on the port side of the hull which will be saturated with epoxy resin. The starboard side will be done the next day and then the job of fairing the hull before it gets turned over begins.
Big Pond Boat Shop is located in Martins River, Nova Scotia. The Shop builds boats; power, sail and human powered to 30` www.bigpondboatshop.com
Tuesday, 9 August 2011
August Update
This is a completed Joel White designed Marsh Cat, the second one that we built, sailing on Cheasapeake Bay. This great little boat is cold molded by our shop. This summer we started #4. The picture on the right is the beginning of the mold construction. After the stations are complete, stringers are attached and the process of cold molding begins.
In the next picture, a layer of 10oz fibreglass cloth has been laid on the port side of the hull which will be saturated with epoxy resin. The starboard side will be done the next day and then the job of fairing the hull before it gets turned over begins.
In the next picture, a layer of 10oz fibreglass cloth has been laid on the port side of the hull which will be saturated with epoxy resin. The starboard side will be done the next day and then the job of fairing the hull before it gets turned over begins.
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment